POT STILL Vs PATENT STILL METHOD

  • Distillation is the process of converting a liquid into gas or vapor by heating it and then condensing it back into liquid form.
  • When spirits are distilled the original liquid has already been fermented and is an alcoholic ‘wine’ or wash. After the ‘wine’ or wash has been converted into vapor and then condensed back into a liquid it is called a distillate. Impurities are left behind in the original container.
  • The equipment used to distill spirits is called a STILL. A still has three essential parts: the original container in which the wash or wine is heated to turn into vapor, the condenser in which the vapor is cooled, and the receiver in which the distillate or distilled spirit is collected.
  • This system works because ethanol boils at 78.5⁰C and water at 100⁰ C. When the alcoholic wash (“wine”) is heated to 78.5⁰C the alcohol boils off leaving other constituents, mostly water behind.
  • The first part of the distillate is the “heads” followed by the “heart” and lastly the “tails”.
  • The “heads” and the “tails” contained mostly impurities which also add to the flavor.
  • The distiller would decide the amount of impurities required and for what purpose.
  • The original liquid from which drinkable spirit is distilled can be grape wine (as in the case of Brandy), sugar wine (for Rum), fruit wine (for Cherry Brandy), or malted or un-malted grain wine (for Whisky, Gin and Vodka)

POT STILL 

The pot still or the ‘alembic or alambic’ is the earliest and traditional form of still. These were basically enclosed kettles, which narrowed towards the top to collect vapor created by boiling. A downward pipe from the head carried the vapor through cold water and caused it to condense and it could be collected in a receiving chamber.

Copper was the best metal for making the still as it drew out the impurity from alcohol. It produced distilled spirits in batches, one batch at a time. It is a laborious and time consuming process. The stills have to be loaded up, boiled off, cleaned and recharged for every run.

Advantages of Pot Still

  • It produces spirits that are individualistic due to presence of congeners.
  • Spirits with pronounced aromas are produced.
  • Spirits with heavy body produced.
  • Small quantity of wash can be distilled.

Disadvantages of Pot Still

  • It needs more time and labour.
  • It is costly to operate.
  • Needs frequent cleaning and refilling, after each distillation.

PATENT STILL METHOD/COFFEE STILL METHOD/COLUMN METHOD/CONTINUOUS STILL METHOD

It was not until the late 1830’s that a new form of still was invented which produced spirit as long as the wash was fed into it. It was called the continuous still or patent still or “Coffey Still” or the columnar still. It had two columns, the “analyzer” and the “rectifier” columns.

The “analyzer” vaporizes the alcohol from the hot wash. The rising alcohol vapors proceeded to the “rectifier” column where they cooled down on coming in contact with the cold wash. This purifies, increases the strength and condenses the alcoholic vapors. 

This process produces lighter styles of the spirit (Light body spirits).

Advantages of Patent Still

  • It does not require too much labour, cleaning and refilling.
  • More quantity is produced as compared to pot still.
  • It is cost effective.

Disadvantages of Patent Still

  • It is not suitable for distilling small quantities of spirits.
  • Aroma and other essential elements that are required in a drink may not be achieved.